Current hot runner controllers for plastics processing must be able to cover applications from one to more than 100 channels, which usually requires the development of different device sizes.
The Thermonom hot runner controller is available in only one package size in two configurations with 6 and 12 channels, but can reach any number of channels by interconnecting several units. Due to optimal component utilization, our hot runner controller cannot be beaten in terms of compactness and weight.
Detection of incorrectly connected temperature sensors
Optimised PID controller with automatic adaptation
Synchronisation of several channels with flexible grouping function
Fanless design with convective cooling of the power electronics
Extremely compact - barely larger than US standard letter size, weight 6.5 kg
Clear user interface on a 7" touch screen
Wizard - Fast configuration for tool changes
Diagnostic mode for mould maker and operator
USB (front panel) - Connection of USB storage devices, support for USB-Tethering
Ethernet - Device Coupling & Remote Access
RS-232 and/or RS-485 interface for integration into the control system of the injection moulding machine
HAN D socket, 8-pin, 2 or 3 programmable, potential-free inputs and outputs
HAN E socket, 24-pin, 2 xmould connector, alternatively 3 x HAN E socket, 16-pin or others
CEE plug 32 A (or 16 A for 6 channel version) - easy replacement of damaged connection cable
Direct access to all functions. Critical device settings can be reserved using user access rights management.
The start screen shows an overview of all control zones and allows for programming with just a few clicks.
Measured temperatures, output level and deviations from the set point can be prepared and exported in an intuitively adaptable diagram.
Manufacturing & Support
Am Promigberg 8 | D - 01108 Dresden
Phone +49 (0) 351/88 21-55
Fax +49 (0) 351/88 21-28
Kunststofftechnik Nadler GmbH & Co.KG
Heinrich-Cotta-Straße 5 | D - 01324 Dresden
Phone +49 (0) 351/26 55 128-0
Fax +49 (0) 351/26 55 128-1